The Emperor Modulator in Arc Raiders is loot inside the fallen Emperor on Pendola Pass, and you need it for Gunsmith IV. Your search belongs inside the structure: breachable round panels along the ascent and loot canisters in the final room are the targets. When checking ARC Raiders Items, match the Emperor Modulator name to your Gunsmith IV requirement. The Emperor Gateway Conduit opens the entrance, while Amplification Modules are different rewards you can find during the same run.

What does the Emperor Modulator unlock in Arc Raiders

The Emperor Modulator is a Gunsmith IV upgrade material, not the key you use at the Emperor's entrance. That distinction matters before you spend time collecting access materials: a finished Gateway Conduit gets you through the hatch, but it doesn't complete your search. Keep the Modulator for workshop progression when you bring it home.

Amplification Modules also appear inside the Emperor, with rewards spanning Mk. I through Mk. V. Finding one doesn't mean you've found the Modulator, even though both can come from the interior loot route. Check the full item name before deciding your objective is finished.

There's no established numerical drop rate for the Emperor Modulator in the supplied location data. Its displayed 0% figures come with zero player votes, so they aren't evidence that a container cannot hold it. You also can't turn another player's successful run into a promise that yours will produce the same reward.

How do you enter the fallen Emperor in Arc Raiders

You enter the fallen Emperor with an Emperor Gateway Conduit crafted at Workbench I after learning its blueprint. The recipe takes one ARC Conductive Coupler, one ARC Insulated Coupler, and one ARC Plated Coupler. You'll need to extract with those materials and craft before starting your interior attempt, because you can't make the conduit mid-raid.

Redirection on Pendola Pass provides the access-material route. Find an active Damaged Emperor Relay, collect its Emperor Beacon, and deploy it in an open area, then take cover while debris and the payload land. Breach the large upright Emperor Payload for couplers and a chance at the conduit blueprint; the smaller broken pieces supply ARC parts.

At the fallen Emperor's base, look for the hull socket beside the round hatch and use your conduit there. Bring an Anvil for electrical nodes, a Hullcracker for Hydras, a Snap Hook for traversal, and enough healing and shield supplies to keep moving. Sizing Things Up can provide an ARC Conductive Coupler, but that quest reward is only one entrance ingredient.

Which Emperor containers should you search for the Modulator

Search the breachable round panels during the ascent and the available loot canisters in the final hangar. Don't rush past earlier containers just because the last room holds more loot. The middle trials can appear in different orders, so recognize the containers and exits rather than relying on one memorized sequence.

In the final hangar, shoot six electrical nodes, with three on each side, to release the wall canisters. This also opens the roof and brings small ARC units and a Vaporizer into the room, so use the collapsed container as cover and wait for the Vaporizer to leave before searching. Orange canisters are bombs, and you should step back from any container that flashes.

Search before passing through either hangar exit, since both doors take you out of the room. Leaving the Emperor only returns you outdoors; it doesn't complete extraction from Pendola Pass. Put the Modulator in a Safe Pocket where possible, then call a Ballistic Gondola, remembering that the nearby Reckless Transceiver is exposed.

Your next step is to check which part of the run you're missing: entrance access or the Gunsmith IV material itself. For blueprint options, browse ARC Raiders Bps for sale and confirm the exact listing details before committing to a purchase. Keep your target clear: opening the Emperor gives you a search opportunity, while bringing the Modulator home advances your workshop.